GAI-Tronics’ SIP compatible VoIP Handset Surface-mount Telephones are designed to provide direct point-to-point communications between personnel throughout a facility over an existing LAN. The VoIP telephones are intended for connection to a 10/100 BaseT Ethernet SIP network and operate using power-over-Ethernet or an external power source. VoIP telephones are compatible with Cisco's UCM Version 5.0 or newer. Housed in a 1/4-inch thick, sand-cast aluminum, weatherproof enclosure and coated with an exterior polyurethane finish.
- Braille Metallic Keypad (optional)
- Cast Aluminum Enclosure with Polyurethane Finish
- Compatible with TMA (Telephone Management Application) Software
- Conformal-coated PCBA
- Embedded Browser (No Additional Interface Required) for Web Page Configuration
- FCC &
- IC Certified, UL60950 Listed
- Handset with Noise-cancelling Microphone and 15-inch Armored Cord
- Hearing Aid Compatible
- Indoor and Outdoor Use
- NEMA 3R Weatherproof Rating
- Non-moveable Hookswitch
- Power Over Ethernet or External 24-48 V dc Supply
- Real-time Email Fault Reporting
- RJ45 LAN or WAN Direct Connection
- SIP compatible
- Surface-mount
- Volume Control Pushbutton (Front Panel)
The VoIP telephone features real-time alarm reporting that
enables system supervisors to monitor the phone’s activity
and address callers’ needs or maintenance issues immediately.
GAI-Tronics’ Handset VoIP Telephones’ features make them
ideal for use in any application requiring point-to-point
communications or telephone system access.
|
Embedded web pages held within the VoIP Handset
Telephone can be accessed over a network using a browser
such as (Internet Explorer®) to view, monitor, and change
settings within the unit. GAI-Tronics’ Hands-free Telephones
are housed within corrosion-resistant enclosures and are
designed to provide high levels of unit integrity, delivering a
robust solution for virtually any IP communication application.
In addition to each unit’s real-time email reporting capability,
all telephones can be monitored via a central PC utilizing our
TMA (Telephone Management Application) software. TMA will
systematically poll each telephone on a pre-programmed
schedule (daily, weekly, etc.) and provide a single report with a
variety of available information pertaining to call activity and
fault reporting of the following:
- Configuration error
- Cold reset (caused by power failure)
- Warm reset (caused by internal command or error)
- Keypad error / stuck buttons
- Microphone / Speaker circuit fault
- Handset off-hook (if so equipped)
- Register fail
|
